Buy Fusion Splicer Wisely, Giving Yourself the Best Working Partner!

For communications engineering practitioners, a fiber fusion splicer machine suitable for their own use is the best working partner in their work. There are so many different fusion splicers in the market, how to choose the right one often very headache. How do you choose a suitable one for your own fusion splicer machine? Here are a few tips you need to focus on.

Type of fibers to be fused

For fiber fusion, the first thing to consider is the type of fiber. Single core, leather wire or tail fiber, different fibers correspond to different types of fixture. Part of the fusion splicer’s fixture can only support single-core fiber. It is recommended to buy machines with three-in-one fixture, as the fixture can be applied to all different fiber types. Of course, ribbon fibers are special types of fibers that require the purchase of special machines.

Fiber alignment method

There are two ways of fiber alignment, cladding alignment and fiber core alignment, which are also the differences between a four-motor trunk machine and a six-motor leather wire machine. Four-motor machine can do cladding alignment, the lens of the machine can clearly see the fiber cladding, the cladding is completely docked, but can not see the fiber wrapped inside, there might be biased, fusion loss is slightly greater. Comparing to cladding alignment, the core alignment means that there are two more focused motors on the lens, which can see the fiber in the cladding, thus fusing the fibers together more precisely.

For FTTx projects with short distances or fiber-to-the-home, four-motor machines are perfectly suited. But for a project with a higher melting quality over a long distance, the four-motor machine is less powerful to catch, and a six-motor machine must be used to achieve the project expectations. QIIRUN’s AI-9 Fusion Splicer has 6-motors and shall able to meet your expectations.

Check AI-9 Fusion Splicer from Here

Cost of use

In the use of fiber optic fusion splicer, electrodes and blades are frequently replaced consumables, the cost of frequent replacement is also not negligible. High-quality fusion splicer machines reduce the frequency of electrode and blade changes and, of course, skilled operators can increase the service life of these consumables.

Battery capacity

The capacity of the battery often directly determines the use of the fuse time, fiber fusion machine is generally used in the outdoor environment, once the power is exhausted, it will be in a very awkward situation, and even delay the duration of the cause of greater losses. So the size of the battery capacity is very important. QIIRUN’s 6481B fusion splicer boosts 11.1V 6800mAh Li-battery, once fully charged, the battery supports over 200 times of fusing and heating operations. Of course, mobile power or back-up battery can prevent this from happening, it is recommended to bring one. QIIRUN’s 6481B fusion splicer has pluggable battery pack design, it’s very easy to replace the battery pack.

Check 6481B Fusion Splicer from Here

Price

Finally, we are most concerned about the price. At present, the fusion splicers on the market are mainly Japanese original machines and Chinese products. Japan's original fusion splicer product quality and fusion quality are good, but the price is very high. The Fusion Splicer from Chinese is now becoming better and better in terms of product quality, the price is much cheaper than those of Japanese. For Trunk engineering, short-distance communications engineering or fiber-optic FTTx project, the Chinese fusion splicer is definitely able to meet those requirements.